S8R（Rosewood）

Dimensions 300(w)x428(h)x334(d)mm Weight 17.6kg Drivers Bass cone - 1 x 200 mm (8") ,High Frequency soft dome - 1 x 28 mm Maximum SPL 113 dB (c) continuous pink noise @ 1 m (122 dB (c) per pair RMS music) Frequency Response 53 Hz-20 kHz+2 dB/41 HZ-22kHz -6 dB Connector XLR and ¼ inch Jack combo socket Impedance 10 k ohm electronically balanced Wiring Pin 1 ground sleeve ,Pin 2 hot Tip ,Pin 3 cold Ring Sensitivity 12dBu to +6 dBu for 96dB SPL @ 1 m set by 10 position rotary switch on rear Protective lower filter -3 dB @ 20 Hz，24 dB /oct Protective upper filter -3 dB @ 75kHz，4 dB/oct Crossover 1.19kHz,24dB/oct LF EQ FLAT, -2/-4dB @ 65Hz HF EQ FLAT. ± 2dB for 10kHz LF output power >220W RMs continuous(Note 1) HF output power >150W RMS continuous (Note 1) THD 0.025% at levels up to 1 dB below clip, 20 Hz-20 kHz. Typ 0.005% @ 1kHz Hum & Noise -100 dB referred to clip Note 1 The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100 mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30ºC Voltage Set by internal plugs (nominal 115V or 230V @ 50-60Hz) 230V setting min 160V; restricted output power: max 255V 115V setting min 80V; restricted output power: max 127V Consumption Quiescent: 38W,Typical use: 100W (average music),Max: 160W Indicators Power on: Front mounted Green LED indicates power.Clip: Red LED 2 dB before amplifier clip.Flashing green LED indicates amplifier is not at operating temperature and warming up